XR-4 Series headset
The status indicator light is located on the front side of the headset, next to the power button. The light patterns correspond to headset status as follows:
| LED pattern | Headset status |
| Green (solid) | The headset is connected and working normally. |
| Dim green (breathing) | The headset is idle and the displays have been turned off. This happens automatically when the headset is not used for a while. The headset will activate when you move it and the LED light will turn green. |
| White (wave) | The headset is starting up. |
| Green (blinking) | The headset is shutting down. |
| Orange (solid) | The headset cannot connect to Varjo Base. There can be several reasons for this:
|
| Red (rapid breathing) | The headset is not working properly. There can be several reasons for this. Check Varjo Base for error details and instructions to correct the issue. |
| Purple (solid, breathing) | The headset firmware is being updated. |
| Purple (two blinks) | Headset restarted. |
Headset adapter (LB-4)
The status indicator light is located on top of the headset adapter. The light patterns correspond to headset adapter status as follows:
| LED pattern | Headset status |
| Green | The headset adapter is connected to the computer and the 60 W port in the 3-port charger. |
| Red | The headset adapter is connected to the computer but not the 60 W port in the 3-port charger. |
| Off | The headset adapter is not connected to the computer. |