Automatic tracking camera calibration – XR-4 Series

Varjo inside-out tracking will automatically calibrate the positional tracking cameras in the background while in use. This setting is on by default.

Disabling automatic tracking camera calibration

1. Open Varjo Base.
2. Navigate to Settings > Support.
3. Under Troubleshooting, disable Automatic tracking camera calibration.

When disabled, the latest saved calibration data is used instead.

Resetting tracking cameras to factory calibration settings

1. Open Varjo Base.
2. Navigate to Settings > Support.
3. Press Reset under Troubleshooting > Reset tracking cameras to factory calibration settings.

Note: This will delete all previous calibration data.