Automatic tracking camera calibration – XR-4 Series

Varjo inside-out tracking will automatically calibrate the positional tracking cameras in the background while in use. This setting is on by default.

You can disable automatic tracking camera calibration as follows:

1. Navigate to the Support tab in Varjo Base.
2. Under Troubleshooting, disable Automatic tracking camera calibration.

When disabled, the latest saved calibration data is used instead.

You can also reset tracking cameras to factory calibration settings as follows:

1. Go to the Support tab in Varjo Base.
2. Press Reset under Troubleshooting > Reset tracking cameras to factory calibration settings.

Note: This will delete all previous calibration data.